Scanprobe CCTV Inspection SystemsFocusing on the future

Posts Tagged ‘CIPP Foundation Course’

Foundation Course: The Key Elements of CIPP (Cured In Place Pipe-lining)


Posted on: January 6th, 2014

 

The Course

The course is designed to provide the necessary knowledge required to meet the relevant industry operational and legislative standards. These are detailed within the Training Manual and Course Hand-out pack 2012. The course is based on these guidelines.

The key elements of Cured In Place Pipe-lining (CIPP)

All trainees will receive a copy of the Training Manual and Course Hand-out pack. A copy of this is included within the submission file.

 

The Training Manual and Course Handout pack has all of the detail needed to work with CIPP lining. The operative is expected to refer to the document before starting work in the field on CIPP lining.

 

Aim 

The Aim of the course is “To provide delegates with foundation knowledge of the key elements of Cured In Place Pipe-lining (CIPP)”.

 

Giving the attendee an understanding of their own role in installing CIPP and the Health and Safety implications and risks involved.

 

Objectives 

At the end of the course the attendee will be able to:

 

  • State the purpose and limitations of CIPP Lining
  • State the different installation techniques / lining carrier materials the importance of impregnation and, relevant best practice.
  • Explain how to identify, select, handle and mix resins.
  • Identify Safety, Health and Environmental awareness in relation to CIPP Lining processes as stated in the installation manual.
  • Identify Liner Defects and subsequent cause and effect.
  • Use equipment, tools and safety equipment (PPE) to the required standard.

 

The course is made up of classroom based training and practical outdoor exercises giving the candidates the chance to use the equipment.

 

A knowledge test will take place and the end of the course, along with a practical assessment.

 

The candidates will have acquired and be able to demonstrate the health and safety risks of using lining equipment and the precautions that need to be taken.

They will also be required to demonstrate that they can use the equipment and set it up correctly according to the Installation instructions held within the Training Manual and Course Hand-out pack.

 

CIPP Training Course Dates:

4th and 5th March 2014

 

Cost:

£415.00 (includes NADC card)

 

Venue:

Scanprobe Techniques Ltd

Head Office

Unit 11 Bushey Close

Old Barn Lane, Kenley,

Surrey, CR8 5AU

 

Contact:

Andy Booth (Tel. 0203 253 2001)



Scanprobe Techniques Limited | Registered in England No. 02682996
Registered office: 99-105 Stanstead Road, London SE23 1HH

Wesite Design by STR Design & Print