Scanprobe CCTV Inspection SystemsFocusing on the future

Posts Tagged ‘Drain Lining’

New Micro Inversion Drum from Renoline


Posted on: November 29th, 2016

The new micro inversion drum from Renoline is the smallest, lightest air inversion drum on the market! Weighing in at just 15kg this lightweight and portable piece of kit is a must have for 100mm to 150mm diameter drain liners.

 

  • 15kg in weight
  • Large viewing window
  • Suitable for 100mm to 150mm diameter liners
  • Removable lid for easy installation of inversion liner or inflation hose
  • Holds 50 metres of inflation hose or 15 metres of blow-in inversion liner

 

Micro Inversion Drum from Renoline

 

See our website www.renoline.co.uk for the full range of drain lining and patch materials or contact Andy Booth on 0203 253 2001 for further details.

 

 

 

 

 

 

 

 

 

 



CIPP (Cured In Place Pipe-lining) Foundation Course at Scanprobe


Posted on: March 4th, 2014

Scanprobe are hosting our latest CIPP (Cured In Place Pipe-lining) training course at our offices over the next 2 days. The course is being run by ER Technical Services and is made up of classroom based training and practical outdoor exercises giving the candidates the chance to use the equipment.

 

CIPP Foundation Course training at Scanprobe's offices 4-5 March 2014

CIPP Foundation Course training at Scanprobe’s offices 4-5 March 2014

Candidates undertake a knowledge test at the end of the course, along with a practical assessment. After completing the training the candidates will have acquired and be able to demonstrate the health and safety risks of using drain lining equipment and the precautions that need to be taken.

They will also be required to demonstrate that they can use the equipment and set it up correctly according to the Installation instructions held within the Training Manual and Course Hand-out pack.

The  CIPP Foundation Course includes exercises giving the candidates the chance to use the equipment

The CIPP Foundation Course includes exercises giving the candidates the chance to use the equipment

Please contact us if you require information regarding future training courses being held at Scanprobe or if you wish to talk to us regarding drain equipment hire.

 



Inversion Drain Lining Using No Dig Technology


Posted on: December 30th, 2013

Repairing drain lining using No Dig Technology is a proven and established method of inserting a new replacement pipe within an existing damaged pipe without needing to excavate.

The new drain lining is inserted into the damaged pipe by a method called inversion which uses either water or air pressure to fit it tightly within the wall of the existing damaged pipe. When the inversion process is complete the new pipe structure is completely rigid, producing a stronger, reinforced pipe fitted within the existing pipe resulting in a minimal loss of diameter of approximately 6%.

The drain liner is manufactured from a special dense impermeable felt and is designed and tailored to fit exactly the internal dimension of the pipe to be refubished. The thickness of the lining material can be varied according to design specifications required. We recommend the following products:

 

Drain Lining - Renoline Flexiliner

Renoline Flexiliner

FLEXILINER (For inversion and Drag-in drain lining)

  • Thinner outer coating for added flexibility

 

  • For use in any inversion machine, and can also be dragged-in

 

  • For use in bends up to 65° (inversion) or 90° (Drag-in)

 

  • Low Friction

 

  • Double heat-welded seam for added strength

 

  • For air-tight and water-tight applications

 

  • Fast resin absorption

 

 

 

Drain Lining - Renoline Proflex Liner

Renoline Proflex Liner

PROFLEX LINER (For inversion drain lining)

  • Stitched and welded seam

 

  • Extremely flexible

 

  • Good expansion quality

 

  • For use in bends up to 90°

 

  • Low Friction

 

  • For air-tight and water-tight applications

 

 



New Flexi-Cutter – Lateral Cutter For Pipes And Drains


Posted on: December 13th, 2013

The new Flexi-Cutter from Renoline is a Lateral Cutter that is ideal for cutting out lateral connections after a new drain lining has been installed. Being flexible it can negotiate bends of up to 90 degrees and is designed for pipes between 80mm and 150mm in diameter. This flexible lateral cutter includes an expanding pneumatic ram to hold the unit in place inside the pipe or drain for precision cutting, changeable rails for different pipe diameters and the 90 degree variable angle cutting head is ideal for awkward cuts.

Lateral Cutter -  Renoline Flex-Cutter

The later cutter set includes the Flexi-Cutter, 2 cutting heads, accessories for pipes between 80mm and 150mm in diameter, on board tools, adaptor for the rigid push bars (1.5m and 3.0m), operating/ control hose and a 10m hose kit.

 

Lateral Cutter -  Renoline Flex-Cutter kit

Flexi-Cutter set

Summary:

  • Can negotiate bends of up to 90° (subject to condition)
  • For Pipes 80mm – 150mm Diameter
  • 90° Variable angle cutting head for awkward cuts
  • 20% shorter than original cutter
  • Pneumatic pipe clamp maximises stabilisation for precision cutting
  • Robust and low maintenance
  • Stainless steel construction
 Lateral cutter unit and box

The Flexi-Cutter unit and tool box

The new Renoline Flexi-Cutter lateral cutter for pipes and drains is available to buy and hire.

 

 



What To Look For In A Quality Drain Lining Resin


Posted on: December 10th, 2013

When looking for a quality drain lining resin it is important to look for a resin that is 100% pure polyester. Pure polyester resin is formulated for maximum ease of use and performance, rather than for low cost. In the case of Renoline drain lining resin Norsodyne E8786, the formula also contains a number of additives including a yellow dye which makes it easier for the user to see and eliminates any air bubbles which may become trapped in the fleece during the wet out phase. Other additives help prevent slumping in the pipe and stabilise the cure during long periods of storage.

 

Lower quality filled drain lining resins have totally different characteristics to 100% pure polyester resin and they are cheaper to produce as part of the resin has been replaced with chalk filler giving it a distinctive chalky colour. These lower grade drain lining resins are heavier meaning less resin in every can and they can be stiffer and more brittle meaning that the resin has a tendency to slump down to the bottom of the pipe leaving a thin crown and thicker bottom to the liner which make them unsuitable for the lining of drains. The filler also has a tendency to leave millions of minute air bubbles in the resin possibly creating a porous liner once cured – the filler also makes for a harder impregnation when wetting out into felt drain liner. (If you weigh a litre of pure resin against a litre of filled resin the filled resin would be approximately 30% heavier)

 

Renoline in partnership with Cray Valley provides 100% pure polyester drain lining resins based on tried and tested technologies where maximum performance in the field has always been the overriding priority rather than opt for lower cost, inferior quality products.

 

Renoline drain lining resin

For more information on drain lining resins from Renoline please call us or visit our website.

 

 

 

 



Scanprobe Techniques Limited | Registered in England No. 02682996
Registered office: 99-105 Stanstead Road, London SE23 1HH

Wesite Design by STR Design & Print