Scanprobe CCTV Inspection SystemsFocusing on the future

Posts Tagged ‘Renoline’

New Micro Inversion Drum from Renoline


Posted on: November 29th, 2016

The new micro inversion drum from Renoline is the smallest, lightest air inversion drum on the market! Weighing in at just 15kg this lightweight and portable piece of kit is a must have for 100mm to 150mm diameter drain liners.

 

  • 15kg in weight
  • Large viewing window
  • Suitable for 100mm to 150mm diameter liners
  • Removable lid for easy installation of inversion liner or inflation hose
  • Holds 50 metres of inflation hose or 15 metres of blow-in inversion liner

 

Micro Inversion Drum from Renoline

 

See our website www.renoline.co.uk for the full range of drain lining and patch materials or contact Andy Booth on 0203 253 2001 for further details.

 

 

 

 

 

 

 

 

 

 



Renoline Inversion Kit Offer


Posted on: March 16th, 2016

This Inversion Kit is the complete Renoline installation package for lining pipe diameters 100mm Ø – 150mm Ø. Why spend more when you can save on buying the complete inversion kit, everything  you need to set up for drain lining on your van.

 

£3350.00 plus VAT

 

inversion kit

 

PACK INCLUDES:

·         Impregnating Machine

·         240v Compressor

·         50mx100mm Ø Inflation Hose

·         50mx100mm Ø Superliner

·         3x20kg Open Top Kegs polyester resin)

·         5kg Accelerator

·         5kg Activator

·         2x Clamp Sets

·         2x Measuring Jugs

·         Large Funnel

·         Mixing Paddle

·         2x Buckets

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you would like further product details please contact  Renoline sales or call 0203 253 2001.



Renoline Invests In New Pfaff Hot Iron Welding Machine


Posted on: June 13th, 2015

Renoline continues to invest in new, state of the art technology in order to provide our Customers with quality products and services. Our latest investment is a Pfaff Hot Iron Welding Machine, which welds our inflation hose together in excess of 450 degrees C making a very secure bond when used in conjuction with Renoline drain liner.

 

The new Pfaff machine has computerized temperature monitoring and roller system which ensures an air tight weld on the inflation hose which has been tested and passed by the WRc.

 

This one machine represents an investment of in excess of £30k making it the third Machine to be replaced within the last 12 months and adding up to a total investment of around £100k on new drain lining manufacturing machinery.

 

Pfaff Hot Iron Welding Machine

Pfaff Hot Iron Welding Machine

Please contact the Renoline shop for all your Drain Liner needs on 0203 253 2001 or email us at sales@renoline.co.uk

 



Scanprobe to open Saturdays for Drainage Products, Hire & Servicing


Posted on: February 2nd, 2014

Scanprobe have announced that they will be open for business on Saturdays from 1st March 2014 between 8am and 12pm. This will allow Customers to use the shop which stocks an extensive range of drainage products including brands such as Renoline, Honda, Monument Tools and of course Scanprobe. The Scanprobe drain camera Hire and Servicing departments will also be available to Customers during these hours enabling the facilitation of urgent repairs and hire needs for the working week ahead.

Drainage products available from the Scanprobe shop

Drainage products available from the Scanprobe shop

Scanprobe recently announced their Drain Repair Equipment Hire Guarantee whereby they will beat any written quote for CCTV inspection system / drain camera hire. Scanprobe’s hire rates vary over longer periods of time and hire rates include a free monthly service on the equipment. Scanprobe will match and beat any price guaranteed so if you can find a camera anywhere cheaper, please let us know (we will require proof and equipment specifications).

The Scanprobe warehouse stocks an extensive range of drainage products

The Scanprobe warehouse stocks an extensive range of drainage products

Please contact the Scanprobe Service department on 0203 253 2001 for your urgent drain camera repairs – we are always wiling to repair competitor drain cameras where possible so please ask us for advice if required.



Patch Repairs On Defective Pipes & Drains


Posted on: December 16th, 2013

When it comes to patch repairs on faulty pipes and drains we recommend the Renopatch kit from Renoline which comes packaged in a small disposable box and includes everything you require to carry out a successful pipe patch repair. The kit includes plastic protective packer sleeves, two pairs of latex gloves, a resin spreader, elastic bands and wire cable ties, fibre glass matting, ready to pour resin and a ground sheet.

 

Renopatch pipe patch repair kit

Renopatch pipe patch repair kit

Cut flush the cable ties

Cut flush the cable ties

 

Before starting the patch repair ensure that the pipe has been surveyed and is clear of any debris and obstructions. When ready to apply the Renopatch patch repair kit locate the defect with a CCTV drain camera and make a note the distance in order to carry out the patch repair. The next step is to feed the protective sleeve over the packer and secure both ends with the cable ties provided in the Renopatch kit and with a pair of snips cut flush the cable ties.

 

 

 

Spread the resin over the matting

Spread the resin over the matting

Using a sharp knife make a small hole in each end of the protective sleeve in order to allow air to escape when the packer is being inflated. Next, lay out the protective ground sheet and open up the fibre glass matting making sure the shiny side is facing upwards. Open up the resin containers and pour the thinner resin into the ticker resin container then replace the top securely and shake the container with the resin mixture vigorously for 30 seconds. The resin is now activated so pour the resin solution over the fibre glass matting and spread evenly using the spreader provided to the edges of the matting. (Due the the cross axle design of the matting in the Renopatch kit you only need to resin out the shiny side saving time and avoiding mess).

 

Roll the packer onto the matting

Roll the packer onto the matting

 

When the resin is spread simply fold each side into the middle of the matting, then take the packer and place in the middle of the matting, roll the packer onto the matting making sure the matting is centralised – the elastic bands or wire included in the kit can be used to secure the ends.

 

 

 

 

 

patch is central and covering the defect

Patch is central and covering the defect

Slightly inflate the packer before inserting into the pipe, this will ensure any slackness is taken up, and connect the air hose into the packer and secure with the locking nut. Connect the rod to the packer and secure. Under the supervision of a drain camera insert the Renopatch into the pipe and push (or pull) the packer down to the pipe defect making sure that the patch is central and covering the defect.

 

 

 

 

Connect up the hoses to the compressor

Connect up the hoses to the compressor

Connect one end of the short air hose to the compressor and connect the other end of the short air hose to the regulator valve then connect the regulator to the long air hose which is already connected directly to the packer. Turn on the compressor and inflate to 2.5 bar. The regulator valve has a safety blow off release which means you can never over inflate the packer – on unstable pipework we would recommend inflating to a lower pressure.

 

 

 

Remove the packer

Remove the packer

Once the patch is cured simply twist the air release valve and deflate the packer and the packer should just slide out of the patch. Renoline supplies two different curing times for the Renopatch kit being half an hour and an hour and a half.

 

 

 

 

 

 

 

The following video shows step by step the process for applying a Renopatch patch repair.

 

We believe the Renopatch patch repair kit is the most user friendly pipe repair kit on the market and once you have tried it you will not want to use any other system. For more information and details of how to order please visit the Renoline website.

 

 



New Flexi-Cutter – Lateral Cutter For Pipes And Drains


Posted on: December 13th, 2013

The new Flexi-Cutter from Renoline is a Lateral Cutter that is ideal for cutting out lateral connections after a new drain lining has been installed. Being flexible it can negotiate bends of up to 90 degrees and is designed for pipes between 80mm and 150mm in diameter. This flexible lateral cutter includes an expanding pneumatic ram to hold the unit in place inside the pipe or drain for precision cutting, changeable rails for different pipe diameters and the 90 degree variable angle cutting head is ideal for awkward cuts.

Lateral Cutter -  Renoline Flex-Cutter

The later cutter set includes the Flexi-Cutter, 2 cutting heads, accessories for pipes between 80mm and 150mm in diameter, on board tools, adaptor for the rigid push bars (1.5m and 3.0m), operating/ control hose and a 10m hose kit.

 

Lateral Cutter -  Renoline Flex-Cutter kit

Flexi-Cutter set

Summary:

  • Can negotiate bends of up to 90° (subject to condition)
  • For Pipes 80mm – 150mm Diameter
  • 90° Variable angle cutting head for awkward cuts
  • 20% shorter than original cutter
  • Pneumatic pipe clamp maximises stabilisation for precision cutting
  • Robust and low maintenance
  • Stainless steel construction
 Lateral cutter unit and box

The Flexi-Cutter unit and tool box

The new Renoline Flexi-Cutter lateral cutter for pipes and drains is available to buy and hire.

 

 



What To Look For In A Quality Drain Lining Resin


Posted on: December 10th, 2013

When looking for a quality drain lining resin it is important to look for a resin that is 100% pure polyester. Pure polyester resin is formulated for maximum ease of use and performance, rather than for low cost. In the case of Renoline drain lining resin Norsodyne E8786, the formula also contains a number of additives including a yellow dye which makes it easier for the user to see and eliminates any air bubbles which may become trapped in the fleece during the wet out phase. Other additives help prevent slumping in the pipe and stabilise the cure during long periods of storage.

 

Lower quality filled drain lining resins have totally different characteristics to 100% pure polyester resin and they are cheaper to produce as part of the resin has been replaced with chalk filler giving it a distinctive chalky colour. These lower grade drain lining resins are heavier meaning less resin in every can and they can be stiffer and more brittle meaning that the resin has a tendency to slump down to the bottom of the pipe leaving a thin crown and thicker bottom to the liner which make them unsuitable for the lining of drains. The filler also has a tendency to leave millions of minute air bubbles in the resin possibly creating a porous liner once cured – the filler also makes for a harder impregnation when wetting out into felt drain liner. (If you weigh a litre of pure resin against a litre of filled resin the filled resin would be approximately 30% heavier)

 

Renoline in partnership with Cray Valley provides 100% pure polyester drain lining resins based on tried and tested technologies where maximum performance in the field has always been the overriding priority rather than opt for lower cost, inferior quality products.

 

Renoline drain lining resin

For more information on drain lining resins from Renoline please call us or visit our website.

 

 

 

 



Scanprobe Techniques Limited | Registered in England No. 02682996
Registered office: 99-105 Stanstead Road, London SE23 1HH

Wesite Design by STR Design & Print