Your basic guide to a pipe inspection system

Did you know that an average household can leak up to 10,000 gallons of water? If you combine all the wasted water in the country, it amounts to 1 trillion gallons. On average, this is how much 11 million homes use on average.

Aside from a lot of water being wasted, can you imagine paying for thousands of wasted gallons you never used?

This is why early detection of leaks is important, and with a pipe inspection system, it’s more than possible. If you want to know how it works and what benefits it offers, read on.

How does a sewer camera work?

In a common setting, sewer lines are sitting under the foundation of your home. The foundation is about 4-5 inches long and is two feet above the sewer lines.

This necessitates the use of a sewer pipe inspection camera when you want to identify an issue with your pipes.

It is a long ‘snake,’ at the end of which a video camera is attached. It is flexible enough to navigate the sewer lines and turn corners with ease.

It offers a monitor aboveground with a live feed of the pipes’ state as the camera goes through them. This enables the technician to see what precisely the problem is and where it is located. As such, it is used for accurate plumbing leak detection.

For future use, the whole sewer camera system can record the video.

Pros of using a sewer camera to detect leaks

Before pipe cameras were invented, homeowners were already experiencing leaks, and plumbers were already fixing them. This means there is a conventional way to identify leaks. Then what makes a sewer camera beneficial?

  • It doesn’t require much digging: Traditionally, a lot of projects involved digging the whole backyard to locate a single leak. However, with a camera, you can easily find the leak underground.
  • It saves you time: Since there’s no guesswork involved, using a sewer camera is faster in identifying issues as compared to other conventional methods.
  • It saves you money: Fixing and locating leaks cost more in the past because of how extensive the processes are. For example, diggings add to the high cost of the plumbing service. However, this cost is eliminated with the use of a sewer camera.
  • It makes it easy to locate issues: Camera can allow you to see buildup within the rusting, pipes, and even tree roots. It can also assist you in mapping out your lines, determining the type of system you have, and seeing the connections.

When to use a pipe inspection camera service?

While plumbing leaks are difficult to detect, their symptoms are usually easy to identify. For example, if your water bill suddenly skyrockets, you might be dealing with a leak, especially if your usage has remained the same.

Another sign of a plumbing leak is a change in water pressure. The change can either be intermittent or consistent and can either be in the specific rooms or whole house. Either way, it is a major sign of a leak.

If you weren’t able to rectify a small leak in time or your leaking issue is big, you might deal with damage to the structure of your house. You might notice water stains on your wall, floor, or ceiling. Another indicative sign of a leak is bubbling on the drywall.

If you let the problem go this far, you may require thousands of dollars to solve it. This is also dangerous because it weakens the structure of your house.

Mold and mildew is another symptom and danger of a plumbing leak. It won’t be solved by drenching the house with bleach. As long as there is water leaking, mold will keep coming back.

Plus, keep your ears open because if you hear water flowing even when all the faucets are turned off, the water may be leaking somewhere. Often, you can hear where the flowing is the loudest. Please make a note of that; it will assist the pipe inspection camera crew in knowing where to check first. 

Add a Comment